Most Popular
1. It’s a New Macro, the Gold Market Knows It, But Dead Men Walking Do Not (yet)- Gary_Tanashian
2.Stock Market Presidential Election Cycle Seasonal Trend Analysis - Nadeem_Walayat
3. Bitcoin S&P Pattern - Nadeem_Walayat
4.Nvidia Blow Off Top - Flying High like the Phoenix too Close to the Sun - Nadeem_Walayat
4.U.S. financial market’s “Weimar phase” impact to your fiat and digital assets - Raymond_Matison
5. How to Profit from the Global Warming ClImate Change Mega Death Trend - Part1 - Nadeem_Walayat
7.Bitcoin Gravy Train Trend Forecast 2024 - - Nadeem_Walayat
8.The Bond Trade and Interest Rates - Nadeem_Walayat
9.It’s Easy to Scream Stocks Bubble! - Stephen_McBride
10.Fed’s Next Intertest Rate Move might not align with popular consensus - Richard_Mills
Last 7 days
Stock Market Rip the Face Off the Bears Rally! - 22nd Dec 24
STOP LOSSES - 22nd Dec 24
Fed Tests Gold Price Upleg - 22nd Dec 24
Stock Market Sentiment Speaks: Why Do We Rely On News - 22nd Dec 24
Never Buy an IPO - 22nd Dec 24
THEY DON'T RING THE BELL AT THE CRPTO MARKET TOP! - 20th Dec 24
CEREBUS IPO NVIDIA KILLER? - 18th Dec 24
Nvidia Stock 5X to 30X - 18th Dec 24
LRCX Stock Split - 18th Dec 24
Stock Market Expected Trend Forecast - 18th Dec 24
Silver’s Evolving Market: Bright Prospects and Lingering Challenges - 18th Dec 24
Extreme Levels of Work-for-Gold Ratio - 18th Dec 24
Tesla $460, Bitcoin $107k, S&P 6080 - The Pump Continues! - 16th Dec 24
Stock Market Risk to the Upside! S&P 7000 Forecast 2025 - 15th Dec 24
Stock Market 2025 Mid Decade Year - 15th Dec 24
Sheffield Christmas Market 2024 Is a Building Site - 15th Dec 24
Got Copper or Gold Miners? Watch Out - 15th Dec 24
Republican vs Democrat Presidents and the Stock Market - 13th Dec 24
Stock Market Up 8 Out of First 9 months - 13th Dec 24
What Does a Strong Sept Mean for the Stock Market? - 13th Dec 24
Is Trump the Most Pro-Stock Market President Ever? - 13th Dec 24
Interest Rates, Unemployment and the SPX - 13th Dec 24
Fed Balance Sheet Continues To Decline - 13th Dec 24
Trump Stocks and Crypto Mania 2025 Incoming as Bitcoin Breaks Above $100k - 8th Dec 24
Gold Price Multiple Confirmations - Are You Ready? - 8th Dec 24
Gold Price Monster Upleg Lives - 8th Dec 24
Stock & Crypto Markets Going into December 2024 - 2nd Dec 24
US Presidential Election Year Stock Market Seasonal Trend - 29th Nov 24
Who controls the past controls the future: who controls the present controls the past - 29th Nov 24
Gold After Trump Wins - 29th Nov 24
The AI Stocks, Housing, Inflation and Bitcoin Crypto Mega-trends - 27th Nov 24
Gold Price Ahead of the Thanksgiving Weekend - 27th Nov 24
Bitcoin Gravy Train Trend Forecast to June 2025 - 24th Nov 24
Stocks, Bitcoin and Crypto Markets Breaking Bad on Donald Trump Pump - 21st Nov 24
Gold Price To Re-Test $2,700 - 21st Nov 24
Stock Market Sentiment Speaks: This Is My Strong Warning To You - 21st Nov 24
Financial Crisis 2025 - This is Going to Shock People! - 21st Nov 24

Market Oracle FREE Newsletter

How to Protect your Wealth by Investing in AI Tech Stocks

BP Hard Cap Installation And Relief Wells Wellbore Problems

Politics / Environmental Issues Jul 07, 2010 - 02:59 AM GMT

By: Dr_Stephen_Rinehart

Politics

Best Financial Markets Analysis ArticleBackground - In December 2005 (http://www.sciencedaily.com/releases/2009/08/090804090942.html), scientists aboard IODP (Integrated Ocean Drilling Program) Expedition 312 approached mantle depths while drilling to investigate superfast seafloor spreading rates. The research expedition penetrated volcanic rock (gabbros) and reached a fossil magma chamber lying 1.4 kilometers beneath the seafloor.


The Moho, or mantle, lies beneath the gabbros layer of ocean crust at depths that vary from about 5-10 km. beneath the ocean floor, to about 40 km. beneath the continents, to as much as 70 km. beneath some mountain ranges. This shows that one could possibly expect to be drilling the earth’s mantle by 18,000 ft+ (BP’s Macondo could have been drilled much deeper than 18,000 feet). The deeper you drill the higher the temperatures and pressures which will be encountered. There are other wells within a 50-mile radius of Macondo may have had reservoir pressures of 14474 psi at temp of 212 F at a depth of 15,000 ft (Ref: JPT (Journal of Petroleum Technology, June 2009, www.onepetro.org))

Several weeks ago, a BP VP (Mr. Kent Wells) presented a video description http://bp.concerts.com/gom/kentwellstechnicalupdate061010a.htm) of a large heavy-wall cylindrical pressure vessel which he called an “overshot” device. I think this is what Admiral Thad Allen is calling a “Hard Cap” IN which BP is planning to replace the current “containment dome” with a huge (75 ton) cylindrical pressure vessel. What caught my immediate attention in the BP video was the wall thickness of this pressure vessel was ten-inch thickness steel (steel not specified). The dimensions stated by Mr. Wells for the BP “Overshot” device are:

Diameter: 58 inches

Wall Thickness: 10.0 inches

Length: 408 inches

Weight: 75 tons

There is an 18.75 in diameter flange welded to bottom of the pressure vessel to match the API flange on the current BOP top flange.

Pressure Vessel (BP Hard Cap) Design Calculations

To look at an estimate of the possible maximum design pressures which could be accommodated by this particular BP pressure vessel, go to the website:

www.pveng.com/ASMENotes1.html and scroll down close to the bottom of the webpage and click on “Design Tools” and “Pipe and Shell Design Tool” which should open an Excel Spreadsheet:

http://www.pveng.com/new/ASME/ASME9/Pipe&Shell_Design_Tool.xls

in which you can read in the following data (ver E4.02):

Dimensions:
58.0 inches - outside diameter
10.000 inches – nominal wall thickness
408 inches – length
0.125 inches – corrosion allowance

Material and Conditions:
HY125 KSI – this is a special high strength steel (requires Gov approval)
125,000 – allowable stress (attempt at max plastic limit design no safety factor)
0.85 – long seam weld efficiency (default value)
0.85 – circular seam weld efficiency (default value)
0.0% - undertolerance allowance
41,975 psi – interior pressure (max well bore pressure before blowout)

Calculated Properties:
Volume (cuft) – 267.78
Weight (lb) – 174491.6 (87.2 tons)

Required Thickness:

Required Minimum Thickness   9.997 inches (10.0 inches!)

Check: Acceptable thickness

Remarks: Since the type of steel was not specifically stated, an assumption was made to see what was the maximum design pressure we could achieve if we used a super high strength steel. The bottom line is that with a 125,000 psi super steel with an internal pressure of 41,975 psi (well bore blow-out pressure) the required thickness is indeed ten inches. No information was given as to the dimensions of the elliptical (or hemi-head) design and I assume relief values (no video shown of the other end of this pressure vessel). Mr. Kent Wells also mentioned there were two other designs also being fabricated (nothing else stated).

I did not post this article to the Internet several weeks ago as I was waiting to see who would state the actual well head blowout pressure was 40,000 psi (not just some wild range of 20,000 psi to 100,000 psi). For several weeks this specific number was not mentioned on oil spill websites until I heard a video on the website www.rense.com on July 01 (Thursday) by a Mr. Lindsay Williams (appears to have been pulled or unavailable “Guests 6-28-10 thru 7-4-10) who stated that his “oil source” said the wellhead pressure has now been measured at 40,000 psi (use your own discernment on this one). Mr. Williams also stated there were fissures/cracks and that if not stopped the well could flow for another 30 years (implying some 675 billion barrels of oil in a super reservoir or it is being produced within earth’s mantle and flowing into reservoir from underneath as abiotic oil). A reservoir of this size would be several orders above any public disclosures by BP or the US Government.

Summary:

  1. There is no question that what BP/Adm Allen is calling a “Hard Cap” or “Overshot Device” is a specially designed and fabricated high pressure cylindrical vessel to initially mate with flanges on current BOP while a bottom kill with relief wells are being drilled/attempted. If the bottom kill is successful that these heavy-walled pressure vessels could replace the BOP on Macondo as well as possibly serve as a “BOP” on both relief wells being drilled since they also can hit high pressure gas.
  2. Pressures of 40,000 psi could fracture thousands of feet of a granite rock cap once crack propagation are initiated into the granite cap thru a deep drilling program. The problem is once a crack is initiated in rock within a high pressure formation the cracks can propagate both horizontally a large distance (think shale oil) as well as vertically at relatively small pressures. Thus, we can have high pressure oil and gas coming into the well bore well above the bottom of the well (i.e., at the bottom of the 18-inch casing
  1. A very high blowout pressure may explain some mud or oil flow possibly observed in cracks outside the immediate well bore area and the fact that the Thomas Jefferson noted some anomalies around the well bore in a recent survey. If the well is relatively free-flowing thru the current BOP (path of least resistance) there may be only a limited flow thru these outside cracks and fissures. This does not resolve the issue reported by Matt Simmons on CNBC (with Dylan Ratigan) that there is another area of a major blow-out miles away from what we are being shown.
  2. The idea of using a high pressure cylindrical vessel maybe to adjust the relief valves at the top of the vessel (option not available with current containment dome or damaged BOP), until a slight oil/gas flow is initiated thru the fissures (surrounding the immediate well bore) and start a massive mud injection to try and seal these fissures before attempting the final bottom kill. This may require an “aircraft carrier full of mud” and so we may have had to wait until the Loch Rannoch was on site and possibly retrofitted with large mud pumps.  It would be a major unknown as to what size these fissures are and how deep they run (but over 10,000 ft) so one would need a significant capacity of additional mud.
  3. If this BP pressure vessel is being designed to withstand 40,000 psi internal pressure using a super strength steel (or K-Monel), BP/Gov did indeed drill a well beyond 20000 ft TOD and probably into a major abiotic oil reservoir where the blowout pressure exceeded 26,660 psi (20,000 psi rated API flange and assuming a 1/3 increase to ultimate plastic limit state design = 20,000 + 6660 = 26660 psi). 
  4. If the pressures in the bottom of the Macondo well bore exceed 27,000 psi there is no attempt probably being made to drill a relief well into the bottom of this well bore. It would buckle any drill string and you are risking another catastrophic failure by exceeding all known rated API safety flanges unless some special high pressure flanges and valves have been fabricated in past 50 days (cannot drill into high pressure well without proper safety equipment and this one is something not seen before). What has to be done is to intercept the well bore at a much higher point (much larger well bore area) where the pressures will be below 20,000 psi and preferably below 15,000 psi. Unfortunately, this makes sealing the Macondo well a low probability success as the well bore may already have been sandblasted open and major cracks have propagated horizontally at the bottom of the well. So it all comes down to what the well bore pressure/temperature is at along the entire well bore, how many high pressure zones are in play, how much of the granite cap is fractured, and what is the topography along the well bore. Has the Mississippi Canyon wall been fractured?
  5. The Macondo Well has all the earmarks (based on current response, length of time to drill the relief wells, high pressure hard cap designs/fabrication) of being a super high pressure blow-out that is into the earth’s mantle. The “red oil” that is being seen floating on the GOM surface could be from the earth’s mantle (Where is the chemical signature for this oil after 70 days?). If this well had only been in the range of 14,500 psi well bore pressures, we would have already drilled the relief well and sealed it off (by day 40 at the latest with 7000 barrels of mud). However, since this has not happened, one can assume the situation is in a transition of going from very bad to worse with maybe three options left. Try and seal it with massive amount of super heavy mud (try and seal cracks/fissures) while attempting to adjust the well bore pressures with a massive cylindrical pressure vessel(s) on both relief wells and Macondo, attempt to seal it (way down-hole) with a small nuke if the granite cap is not fractured (maybe start with one-kiloton weapon), or let it flow for thirty+ years and contaminate the world’s oceans/environment (unacceptable or not?!). If the granite cap is badly fractured this could preclude using a 10-kiloton nuke (or any weapon to try and seal well bore) near the bottom of the well bore. If bottom kill does not work, this mega-disaster has implications of biblical proportions because there may not be an option other than trying to capture as much oil as possible with fleet of specifically-designed super tankers (both clean-up and separation/storage) for decades to come.
  6. There were technical discussions decade ago about how to separate “red oil” from its environment so it could be produced (Canada has significant amounts of red oil) (see also: “Slipping Out of Oil Noose” by Larry Elgin and Dr Stephen Rinehart www.wnd.com/news/article.asp?Article_ID=22911, May 21, 2001).
  7. Question of implementing a massive oil containment in Florida Keys (last “choke point” before entry into Atlantic Ocean) needs to be addressed now by World Governments to try and contain the oil from spreading into Atlantic Ocean and beyond. Possibly the only Command and Control Structure left to manage this effort is within DOD itself lead by US Navy. Oil tar balls are being reported at Jensen Beach on Florida’s East Coast (already getting late in the day). Assets need to be mobilized worldwide.
  8.  Air quality issues are and will continue to be a major issue despite no real information forthcoming from USGS. There is currently a hot pipe (i.e., BP well blow-out) running through a massive methane hydrate formation (1200m thick?) that is possibly heating the formation and venting large amounts of methane gas underwater in addition to the one-half ton of methane being produced by the well for each ton of oil (ref; Dr Samantha Joye – Univ. of Ga. Researcher aboard RV Walton). This could be the real origin of the massive underwater methane/oil plumes and it there maybe more than one major source. NOAA/EPA has two codes for running Air Quality predictions (in fact there are several options/predictions being run). The output of a code from OILSPILL (surface oil) is input to AIRMAP to prediction onshore concentrations of benzene, hydrogen sulphide and methylene chloride depending on actual wind son data. Where are the predictions and IVV/validations by independent Universities of air quality on Gulf of Mexico (numerous websites have commented on total lack of data other than TV station in New Orleans)? Benzene is a known carcinogen (unsafe at 10 ppb or less) and hydrogen sulphide can cause deaths at 3000+ ppb. It is a major irritant and dangerous at levels of 50 ppm.

By: Dr Stephen A Rinehart

stevecin@bellsouth.net

© 2010 Copyright Stephen A Rinehart- All Rights Reserved

Disclaimer: The above is a matter of opinion provided for general information purposes only and is not intended as investment advice. Information and analysis above are derived from sources and utilising methods believed to be reliable, but we cannot accept responsibility for any losses you may incur as a result of this analysis. Individuals should consult with their personal financial advisors.


© 2005-2022 http://www.MarketOracle.co.uk - The Market Oracle is a FREE Daily Financial Markets Analysis & Forecasting online publication.


Comments

Zach Samford
07 Jul 10, 14:07
Very nice article Dr Rinehart

Very nice article Sir. Its wonderful to see that some educated people are finally beginning to get the courage to speak out. I hope you dont mind but I have linked this article in some other forums.


novaflo
13 Jul 10, 23:06
BP New Cap

So...the "new" cap fitting just ran into: "Delays".

looks like the wellbore isn't liking all that extra pressure.

hey,we should all move to CANADA!

goodnight USA.

=(


Post Comment

Only logged in users are allowed to post comments. Register/ Log in